Buggy Race 2024

HC-05 Bluetooth module working, Pinout and arduino sample programs

INTRODUCTION

HC-05 Bluetooth module

Bluetooth module is useful for wireless communication for short range of distances (up-to 10m). These modules can be used to control devices like speakers , motors , and for sending and receiving data wireless . This is one of the important and useful module to know about . 

How it works 

To understand well , lets assume the below condition . 

Suppose , Bluetooth terminals are connected to arduino.

Bluetooth is connected to mobile wireless.

Now , the bluetooth module need to receive and transmit signals through wireless communication with mobile . It also has to transmit and recieve signals with arduino through wired communication. 

  •  The  communication between (arduino – BT module) is digital and type is UART(Universal Asynchronous Receiver/Transmitter). In UART communication, there is no shared clock between transmitter and receiver (here bt module and arduino) . For data transmission between two devices , we need clock which synchronizes rate of data transmission between transmitter , if there is no clock , we can’t get synchronization. So , in UART , the communication can only happen with predefined rate or baud rate ( bits per second). For this , the both transmitter(arduino) and receiver(bluetooth module) should operate at same and fixed baud rate. If there is difference in  baud rate , the data will crash and communication doesn’t happen.  The concept is like both devices should communicate at same rate , so if we provide a clock for both , they can see it and adjust themselves to relative rates . But we don’t have clock in UART communication. So they operate at fixed rate.
 
  • (Bluetooth to mobile communication) : This communication is wireless. wireless transmission happens through electro-magnetic waves ( analog communication) . so we must convert the digital signals to analog signals using modulation techniques like FSK(frequency shift keying) and PSK(phase shift keying) . Which converts digital into analog signals of Radio frequency. And then we connect that output to antena to transfer signals wireless. 
 
  • Bluetooth modules operate in the 2.4 GHz ISM (Industrial, Scientific, and Medical) band. This frequency band is globally available and unlicensed, allowing Bluetooth devices to be used worldwide without interference concerns.

pin out 

  • STATE (Status Pin): This pin indicates the status of the module (connected or disconnected).
  • VCC (Power): Connect this pin to the power supply (typically 3.3V or 5V).
  • GND (Ground): Connect this pin to the ground of your circuit.
  • TXD (Transmit Data): Connect this pin to the RX (receive) pin of the device you want to communicate with.
  • RXD (Receive Data): Connect this pin to the TX (transmit) pin of the device you want to communicate with.
  • EN (Enable/Key Pin): This pin can be used to enter AT mode or control the state of the module. When pulled HIGH, the module is in command mode; when pulled LOW, it enters data mode.

 

 

These Indian Startups are paving the way to cut Plastic Usage

Eco friendly startups that are trying to cut plastic Even though we know the harms of plastic. We still...
Screenshot (44)

skills i have gone through in B.Tech

My top 5 in my B.Tech In my engineering, I  got to explore useful and fascinating areas. Here are my...

Aerodynamic stability of Rockets

Aerodynamic stability of Rockets Stability is more more important in any...
igloo by bing

How Igloo's can protect you from cold snow

Igloos and science behind There are Two awesome science aspects behind igloo’s One,...
watts-linkage

Approximate Straight line mechanisms

Approximate straight line mechanisms Click here Here are few exact straight line mechanisms   Watt’s...
Straight line mechanism

Exact Straight Line mechanisms & animations

Exact Straight line mechanisms No matter , what industry it is , it must have straight line mechanism ...
load on different materials a)brittle b)ductile c)completely ductile

Mechanical properties of materials

Mechanical properties define the use of specific material for different purpose . For a situation we...
HC-05 Bluetooth module

Bluetooth module- explanation, pinout , arduino code

Bluetooth module is useful for wireless communication for short range of distances (upto 10m). These...
Rocket_-_Solid_Type_(PSF)

Solid Rockets- a complete overview

Rockets propulsion works with fuel ignition. And gets thrust by expelling mass at high speeds . For...

Books

Get in Touch

Ping Me

Enter your Message

Subscribe to receive more of Engineering